成人免费AA片在线观看-成人免费a级毛片-成人免费a级毛片无码片2022-成人免费a级毛片无码网站入口-成人免费ā片在线观看-成人免费a视频

liu2004
級別: *
精華主題: * 篇
發帖數量: * 個
工控威望: * 點
下載積分: * 分
在線時間: (小時)
注冊時間: *
最后登錄: *
查看liu2004的 主題 / 回貼
樓主  發表于: 2011-05-04 20:42
要的請留郵箱,太大。
                  


Motion Controller Peripheral Software Package
SW6RNC-GSVHELPE
-------------------------------------------------------------------------


Thank you for purchasing this software.
You should carefully read the following terms and conditions
before using this software. And that you can refer the manuals
of WindowsNT/98/2000/XP to resolve the basic operation of
Windows NT/98/2000/XP.

1. Operating requirements

  (a) Hardware requirements
    ?  100% WindowsNT/98/2000/XP compatible PC/AT
            (not support multi-processor)
    ?   CPU :
                Windows NT/98 : Pentium 133-MHz or more recommended
                Windows 2000  : Pentium II 233-MHz or more recommended
                Windows XP    : Pentium II 450-MHz or more recommended
                 (Pentium II 233-MHz or more for Windows 2000)
    ?   Memory : It depends on the OS environment.
                Windows NT/98 : 32 MB or more recommended.
                Windows 2000  : 64 MB or more recommended.
                Windows XP    : 192 MB or more recommended.
    ?   Free disk: 68 MB or more
    ?   Monitor resolution: SVGA(800*600/256 Colors) or more


  (b) OS requirements
    ?   Windows NT Workstation Ver. 4.0(Service Pack2 or later)
    ?   Windows 98
        ?   Windows 2000
        ?   Windows XP Professional
        ?   Windows XP Home Edition

        * The following Windows version is not supported.
            ? Windows NT 3.5 Workstation
        ? Windows NT 3.51 Workstation
            ? Windows NT Server
            ? Windows 95
        * In Windows NT 4.0,the use needs Microsoft Internet Explorer 3.01
          or higher.

2. Installation method

  First, close any others applications running on Windows NT/98/2000/XP.

  From [Start] select [Run...],input "X:setup.exe"(X: CD-ROM Drive)
or click [Browse] and select "Setup.exe" from the CD-ROM drive.
  After starting the installor , follow the instructions of the installor.

3. Notice

(1) When you install this software to a drive which is compressed by
DriveSpace or other tools, if it freezes in installation, please increase
the free space of the drive or select other drive which is not compressed
to install this software.

(2) If you want to change the installation destination or reinstall it,
please uninstall it before installing it again.

(3) Depending on the system font size of Windows NT/98/2000/XP, sometimes
the screen may not be displayed properly, please use a small size font.



-------------------------------------------------------------------------------------

Microsoft and MS-DOS, Windows, Windows NT are registered trademarks of
Microsoft Corporation in the United States and other countries.

Copyright(c) 2001 MITSUBISHI ELECTRIC CORPORATION All Rights Reserved.
zhang850412
有可以拔13570997576 張工
級別: 工控俠客
精華主題: 0
發帖數量: 256 個
工控威望: 2209 點
下載積分: 13860 分
在線時間: 1091(小時)
注冊時間: 2009-07-19
最后登錄: 2025-05-16
查看zhang850412的 主題 / 回貼
1樓  發表于: 2011-05-04 22:35
謝謝樓主…[email protected]
zyfzxh
級別: 論壇版主

精華主題: 12 篇
發帖數量: 6502 個
工控威望: 7510 點
下載積分: 109271 分
在線時間: 4845(小時)
注冊時間: 2006-08-10
最后登錄: 2025-05-24
查看zyfzxh的 主題 / 回貼
2樓  發表于: 2011-05-05 07:54
http://down.ymmfa.com/?id=24
這裡就有,
請說明樓主的版本?
aaaa0595
級別: 略有小成
精華主題: 1 篇
發帖數量: 247 個
工控威望: 304 點
下載積分: 437 分
在線時間: 77(小時)
注冊時間: 2007-07-01
最后登錄: 2024-08-05
查看aaaa0595的 主題 / 回貼
3樓  發表于: 2011-05-06 11:47
廣東工程
級別: *
精華主題: * 篇
發帖數量: * 個
工控威望: * 點
下載積分: * 分
在線時間: (小時)
注冊時間: *
最后登錄: *
查看廣東工程的 主題 / 回貼
4樓  發表于: 2011-05-06 13:21
謝謝了,樓主
song2007
song2007
級別: 略有小成
精華主題: 0
發帖數量: 110 個
工控威望: 257 點
下載積分: 500 分
在線時間: 309(小時)
注冊時間: 2007-10-31
最后登錄: 2025-05-12
查看song2007的 主題 / 回貼
5樓  發表于: 2011-05-08 16:47
[email protected]
謝謝樓主的無私貢獻。
sxy
級別: 略有小成
精華主題: 0
發帖數量: 67 個
工控威望: 235 點
下載積分: 484 分
在線時間: 90(小時)
注冊時間: 2008-12-25
最后登錄: 2025-01-08
查看sxy的 主題 / 回貼
6樓  發表于: 2011-05-09 02:25
你有沒有 運動CPU  程式呢  發來研究下
good
級別: 略有小成
精華主題: 0
發帖數量: 273 個
工控威望: 489 點
下載積分: 788 分
在線時間: 46(小時)
注冊時間: 2008-04-11
最后登錄: 2022-12-10
查看good的 主題 / 回貼
7樓  發表于: 2011-05-09 21:56
能發一份給我嗎?我的是[email protected]       在此謝過了
lzdcy321
級別: 略有小成
精華主題: 0
發帖數量: 120 個
工控威望: 201 點
下載積分: 682 分
在線時間: 46(小時)
注冊時間: 2010-07-16
最后登錄: 2023-04-15
查看lzdcy321的 主題 / 回貼
8樓  發表于: 2011-05-09 23:05
謝謝了,樓主!!!!!!!!!
leozhaott
級別: 探索解密
精華主題: 0
發帖數量: 28 個
工控威望: 146 點
下載積分: 610 分
在線時間: 11(小時)
注冊時間: 2011-06-20
最后登錄: 2012-08-08
查看leozhaott的 主題 / 回貼
9樓  發表于: 2011-06-21 21:51
我想要SW8RNC-GSVHELPE  用于三菱Q173DCPU的  找了好久都沒找著呢!希望有的能發一個給我!
leozhaott
級別: 探索解密
精華主題: 0
發帖數量: 28 個
工控威望: 146 點
下載積分: 610 分
在線時間: 11(小時)
注冊時間: 2011-06-20
最后登錄: 2012-08-08
查看leozhaott的 主題 / 回貼
10樓  發表于: 2011-06-21 21:53
剛剛忘了郵箱了   郵箱:[email protected]
顧仁仁
級別: 略有小成
精華主題: 0
發帖數量: 338 個
工控威望: 342 點
下載積分: 533 分
在線時間: 202(小時)
注冊時間: 2007-10-28
最后登錄: 2025-04-24
查看顧仁仁的 主題 / 回貼
11樓  發表于: 2011-07-10 11:02
謝謝樓主…  [email protected]

亚洲熟妇无码一区二区三区导航 | 四川50岁熟妇大白屁股真爽 | 四虎影视永久在线观看 | 337p西西人体大胆瓣开下部 | 97香蕉超级碰碰碰久久兔费 | 久久国产精品免费视频 | 91精品免费观看 | 69交性视频 | 亚洲av成人一区二区三区 | 久久99精品国产99久久6尤物 | 四虎影在永久在线观看 | 黄色美女免费看 | 精国产品一区二区三区a片 乱精品一区字幕二区 | 极品少妇被猛的白浆直喷白浆 | av无码天堂一区二区三区 | 亚洲国产一区二区三区 | 亚洲人成77777在线播放网站 | 麻豆精品一区二区三区免费 | 精品国产一二三产品区别在哪 | 久久久精品人妻一区二区三区 | 97在线免费观看 | 狠狠久久亚洲欧美专区 | 精品国产中文一级毛片在线看 | aaa级久久久精品无码片 | 中文字幕日韩一区二区不卡 | 亚洲国产精品无码久久 | 领导边摸边吃奶边做爽在线观看 | 边啃奶头边躁狠狠躁玩爽在水里面 | 日韩精品久久久久久免费 | а√天堂资源官网在线资源 | 国产精品综合一区二区三区 | 警察被两个混混脱裤玩j视频 | 91成年人免费视频 | 国产成人久久一区二区三区 | 亚洲中文字幕无码av | 日本在线视频www鲁啊鲁 | 好爽又高潮了毛片免费下载 | 久久精品国产99国产精偷 | 中日av乱码一区二区三区乱码 | 欧美性猛交xxxx乱大交丰满 | 91精品免费不卡在线观看 |